H9 quick settings

EVENTIDE® H9

MIDI CHANNEL RECEIVE
Hold Hotknob+Tap>MIDI>RCV CH

Channel 1(factory default EvenMidi)
(if 2nd H9: Channel 2(factory default EvenMidi))
Don’t put your Midi channel in OMNI.

MIDI THRU (if you use 2 H9)
Hold Hotknob+Tap>MIDI>OUTPUT>THRU

MIDI CC (same for your 2 H9's)
Hold Hotknob+Tap>MIDI>OUTPUT>RCV.CTL

STANDARD CONTROLS
[PSW] -> C0
[FS1: LEFT FOOTSWITCH] -> C1
[PROGRAM-] -> C2
[PROGRAM+] -> C3
[KB0-KB9] -> C22-C31
[EXP] -> BND (PitchBend)

LOOPER CONTROLS
[EMPTY] ->C4
[REC] -> C5
[PLAY] -> C6
[STOP] -> C7
[NXT] -> C8

MIDI PC (same for your 2 H9's) Program MAP
Hold Hotknob+Tap>MIDI>OUTPUT>RCV.MAP

PC127 -> YourLooperPresetNumber
PC125 -> Bypass (Do not change)
PC0 -> YourPresetNumberWanted(not Looper)
PC1 -> YourPresetNumberWanted(not Looper)
PC2 -> YourPresetNumberWanted(not Looper)
PC3 -> YourPresetNumberWanted(not Looper)
PC4 -> YourPresetNumberWanted(not Looper)
PC5 -> YourPresetNumberWanted(not Looper)

EVENMIDI H9 Midi Controller

MIDI CHANNEL SETTINGS
Hold Down UP for 5 seconds and set the number of flashes of blue Led with pots to desirated midi channel number for 1st Eventide® and Yellow Led for 2nd Eventide®. Hold Down UP for 2 seconds to save or Press DOWN to exit without save. Refer to the detailed notice to understand pots behavior.

STANDARD MODE(CC) / LIVE MODE(PC)
Factory default is Standard Mode. Hold Down UP for 5 seconds. Hold Down X1 for 2 seconds. Same thing to switch between Live and Standard Mode.

DUAL/SOLO MODE
Hold Down PSW for 2 seconds

SWITCH MIDI CHANNEL IN SOLO MODE
Press PSW

ACCESS LOOPER MODE
Hold Down X1 for 2 seconds

EXIT LOOPER MODE
Hold Down UP for 2 seconds

HARD RESET SETTINGS
Hold Down UP for 5 seconds.
Hold Down PSW for 5 seconds.

EXPRESSION PEDAL CALIBRATION
Hold down DOWN for 5 seconds. Set the pedal to the extreme position wanted. Press DOWN to record. Set the pedal to the extreme opposite position wanted. Press DOWN to record. Too short interval will not be saved.