Wah wah

Prototype pending

• 2 channels wiring (2 input - 2 outputs) + side switch + Led
• 2 different sounds (1 Mc Coy, 1 Wylde) + side switch + Led
• Output buffer + side switch
• True Bypass + Active Led
• High quality components and matching as close as possible
• 9V DC power supply input
  
  

Two main ideas

1 - Put the wah-wah at two places on the circuit (typically before distortion & after distortion // Direct amp & Fx Loop) and switch the circuit selected on the side enclosure.

2 - Access to two different tones : 60's(Mc Coy, Hendrix Tone...) and today (Zakk Wylde signature). All components are selected to match with historic specifications :

• - ICAR pot & Tropical Fish capacitor (or equivalent)
• - Carling Heavy Duty FootSwitch
• - Mc Coy : Halo inductor - Transistors BC109B - carbon composition resistor - Styroflex capacitor
• - Wylde : Red Fasel Inductor - Transistors MPSA18 (&13) - Resistor Metal Film 1% - Panasonic capacitors - 
• - Outpout buffer side switchable with inside potentiometer to avoid problems with fuzz.

Feel free to subscribe on the mailing list below to be informed once available. There is still a lot of stuff to do but it's cool to share it with you :).